Red Creek Alpine Riller: -5C / -20C Oblique Cut Made in Canada and finer bristle brush is

and finer bristle brush is for finishing liquids and powders for racing

designed for clear visibility with no obstructive shield

Available with 7mm or 10mm bristles

or all three can be bought in this 'full set

The shaft is 530mm long which is shorter than the standard aluminum

Red Creek Alpine Riller: -5C / -20C Oblique Cut Made in Canada and finer bristle brush isThe 5C 20C Oblique Cut is a fine grooved tool for cold, fine grained snow. Use very light pressurethis is for cold conditions where structure must be subtle. How to use: Push the riller in one direction on one side of the ski (front to back), and in the opposite direction on the other side (back to front), with the plastic guide riding against the steel edge. Maintain constant pressuredo not lift the tool during passes. Press harder for deeper