RULAND MANUFACTURING CL30A Shaft Collar Clamp 1Pc 1-7/8 In Alum Cabinets ABUS 74LB40KARED Lockout Padlock Body

ABUS 74LB40KARED Lockout Padlock Body colour Red Body Height 3 in Body Material Plastic-Covered Aluminum Body Thickness 51/64 in Body Width 1 1/2 in Header Danger Horizontal Shackle Clearance 3/4 in Key Type Keyed Alike Non-Removable Key Yes Resistance Properties Corrosion Resistant Tamper Resistant Shackle Diametre 1/4 in Shackle Height 1 1/2 in Shackle Material Steel Shackle Type Open Vertical Shackle Clearance 1 1/2 in Width Across Shackle 3/4 in Bumper colour Red

VELVAC 30330 Splice Connector Connection Type Crimp Insulation Material Nylon/Polyolefin Insulation colour Blue Maximum Operating Temperature 221 Degrees F Maximum Voltage 600 V Minimum Wire Size 16 AWG Maximum Wire Size 14 AWG Standards CSA Certified UL Listed Termination Style Crimp Contact Material Copper Overall Length 1

TRI-ARC WLFS0109Y Fixed Ladder Walk-Thru Included No Exit Top Overall Height 9 ft Overall Width 25 in Material Steel Load Capacity 500 lb Number of Steps 9 Top Step Height 8 ft Rung Dia 3/4 in Rung/Step Spacing 12 in Step Width 18 in Finish Safety Yellow Standards ANSI OSHA Compliant Manufacturers Warranty Length 1 yr

188 in Dimensional Standards ASME B18

9 Finish Black Oxide Thread Size M14-2 Minimum Thread Length 55 mm Fastener Length 120 mm Head Height 14 mm Head Diametre 21 mm Pack Size Small Pack Thread Style Partially Threaded Special Features Not Applicable Countersink Angle Not Applicable Dimensional Standards DIN 912 Flange Diametre Not Applicable

RULAND MANUFACTURING CL30A Shaft Collar Clamp 1Pc 1-7/8 In Alum Cabinets ABUS 74LB40KARED Lockout Padlock BodyRULAND MANUFACTURING CL30A Shaft Collar System of Measurement Inch Bore Type Round Bore Diametre 1 7 8 in Bore Thread Size Not Applicable Collar Outside Diametre 2 7 8 in Inside Height to Flat Not Applicable Clearance Diametre 3. 16 in Collar Width 11 16 in Collar Material Aluminum Keyway Width Not Applicable Collar Material Grade 2024 Keyway Depth Not Applicable Thread Direction Not Applicable centre to Lever Top Not Applicable Collar Construction 1